These bottle fillers are made entirely of stainless steel, which makes them hygienic and easy to clean. They are ideal for filling hot fruit juices and alcoholic beverages such as Bottling wines, schnapps, liqueurs. Depending on the liquid and bottle size, up to approx. 300 liters can be filled per hour. By changing the rubber cone, bottles with twist-off closures can also be filled.
The buffer tank is filled with the medium to be bagged through the inflow tap and the inflow NW 25. The level display shows the fill level of the buffer tank. The cone of the filler valve is pushed upwards with the bottle opening and the bottle is filled immediately. Place the bottle in the bottle support. Take care to stand the bottle straight under the filler valve. Once the bottle is full, you can take it out the bottle support by lifting it up slightly.
Filling performance: 300 l/h
Filling valves: 3
Tank capacity: approx. 23 l
Filling valve: Standard 14 mm
Rubber cone: Standard 30-14 H25
Max. bottle height: 350 mm
Max. bottle diameter: 125 mm
With level indicator
Without insertion thermometer
Length x Width x Height: 550 mm x 500 mm x 1000 mm
Weight: approx. 16 kg
Variants and Options:
|OPT-100063||Rubber cone for 43/53 twist-off|
|OPT-100065||Stainless steel level switch 90° for side installation with extension socket 4 pol.|
|OPT-100072||Float valve made of stainless steel|
|OPT-100088||Filling valve: Magnum 16 mm|
|OPT-100091||Rubber cone: Magnum 40-25 H25|
|OPT-100172||Max. bottle height: 500 mm|
|OPT-100203||Without level indicator|
|Stainless Steel Tables|
Illustrations and technical data are not binding. Design changes are reserved.